Box Structure
Review a flat layout for the selected construction rather than assuming every box uses the same panels and closure.
Choose a box style, enter its length, width and height, and preview a flat layout with trim, crease and bleed guides. Download your free PDF dieline to plan packaging artwork before production.
No preview available
A box dieline is the flat layout of a package before it is cut and folded. The right template starts with the box structure, because a folding carton, locking mailer and corrugated shipping box have different panels, flaps and closure points.
Step 1: Choose a structure. Select the closest box style from the tool above. Options shown include Straight Tuck End, Mailer Box with Wings, Regular Slotted Containers (RSC), Tab-Locking Mailer Box and several additional shipping-box formats. Use a style that matches how your package will assemble and close.
Step 2: Enter your dimensions. Select millimeters or inches, then add length, width and height. Measure the full packed product, including inserts or protective material when needed. Confirm the required inside or outside measurements with your packaging manufacturer before final production.
Step 3: Review and download. Select Update preview to inspect the flat layout and its line guides. Use Download PDF to save the template. Keep a record of the box style, units and measurements so your designer and manufacturer can review the same specification.
Review a flat layout for the selected construction rather than assuming every box uses the same panels and closure.
Enter dimensions in millimeters or inches and check the resulting layout before downloading.
Identify the intended cut boundary and fold positions using the on-screen line legend.
See the bleed guide as an artwork-planning reference; confirm actual print bleed and safe zones with production.
Save a PDF dieline template for artwork planning, supplier discussion and dimensional review.
For small retail products, folding cartons are commonly built around tuck flaps and flat-packed paperboard. The Straight Tuck End option is one specific closure, not a substitute for every carton style.
For ecommerce deliveries and branded unboxing, custom mailer boxes may use wings, roll-end panels or tab-locking closures. Check how the lid and locking tabs meet before deciding where to place artwork.
For carrier handling, stacking or heavier products, corrugated shipping boxes often need a different structural approach. RSC, full-overlap and multi-depth constructions solve different packing problems. Box strength, board thickness and corrugated flute still need to be specified separately from the initial dieline preview.
If your exact box construction is not available in the generator, use the closest option only for early planning. Do not repurpose a different closure as an approved cutting template.
Measure the product as it will actually be packed. Include caps, handles, inserts or protective wrapping that affect fit. A nominal product measurement may not equal the minimum usable interior space. The generator accepts length, width and height, but those inputs alone do not establish the material allowance or finished external box size.
In a flat packaging layout, trim shows where material is intended to be cut, crease identifies fold locations and bleed is artwork extending beyond the trim edge to reduce unwanted unprinted edges after cutting. For a closer explanation of panels, glue areas and print-safe zones, read what a packaging dieline includes.
Treat the downloaded PDF as a planning template until the production team verifies it. Board caliper, corrugated flute, glue or lock geometry, print bleed, safe margins and cutting tolerances may all affect the manufacturing file. Compare packaging materials and production capabilities before finalizing the structure, and plan artwork placement using the final approved layout for your custom printed boxes.
Select the construction that matches the intended opening, closing and packing process.
Check the maximum packed product dimensions, including inserts, padding and protruding parts.
Record the measurement units and verify whether your manufacturer requires inside, outside or crease-to-crease dimensions.
Keep important logos, barcodes and small text clear of folds, cut edges and glue areas.
Confirm final board thickness, bleed and artwork-safe margins during manufacturer prepress review.
Keep the selected structure, dimensions, material preference and estimated quantity together for quoting.
A basic dieline helps you start with the right geometry. Production also depends on the product's full packed size, board choice, closure details, printing requirements and assembly method. For projects where the item or protective insert determines the box, use custom product packaging support to resolve the fit before artwork approval.
When you are ready, send your PDF or dimensions, preferred structure, quantity, material and artwork status through the custom packaging quote form. Custom Packly can review the dieline, help with artwork setup and prepare the final structure for production. You do not need to have a finished dieline to request guidance.